Twin Bass
by Interruptor
by Interruptor
4.5 / 5
(11 votes)
Twin Bass is a bass synthesizer.
VSTi Bass Synthesizer with a double filter architecture allowing to create rich mid-range bass textures together with a solid sub bass foundation. Also vocal-like timbres can be easily created. Features an extensive modulation matrix and individual outs for the filters.
VSTi Bass Synthesizer with a double filter architecture allowing to create rich mid-range bass textures together with a solid sub bass foundation. Also vocal-like timbres can be easily created. Features an extensive modulation matrix and individual outs for the filters.
- 2 Oscillators: Sine, Saw, Ramp, Triangle, Pulse, Noise
- 2 Filters operating in parallel (connection in series is also possible).
- Filter 1: 2 x Low pass, 2 x High pass, Bandpass
- Filter 2: stereo filter with separate cut-off for left and right side (2 x Low pass, 2 x High pass, Bandpass) - Feedback loop for the entire filter section
- Distortion effect with two modes
- hard: metallic distortion sound
- soft: tube-like warm distortion
The distortion effect can be applied pre- or post-filter. Also it is possible to distort only the signal in filter 2, thus preserving a clean signal from filter 1. This setup is predestined to generate a sub bass with filter 1 whereas filter 2 can provide interesting midrange textures in stereo. - Modulation
- 3 x LFO, synchronized to host application
- 3 x ADSR Envelope
- Matrix: 5 modulation slots connect 12 modulation sources to 26 modulation destinations. Pitch bend, amplifier envelope and filter envelope are pre-wired. - Process external signals: In Oscillator 2 an external signal can be selected as the waveform.
- MIDI learn: Right-click any control to assign a midi control and automate the parameter from you DAW.
- Monophonic modes with glide
- Polyphonic modes with max. 8 simultaneous notes
- Individual Outs are available for the two Filters. This feature helps to integrate the bass sound in your mix. For example apply additional effects like reverb to the mid range signal from filter 2 while keeping the sub bass form filter 1 clean.
- Structure display: This panel shows the signal flow of the synth as it results from your settings of the filter and FX routings.
- Pop-up hints: While the mouse hovers over a control a hint appears explaining the function of the control.
Downloads
Win 32 VST
(9.3 Mb)
This synth is great but comes from the developer whose later version of a plug-in causes a fussy DAW to refuse to load a FXB/FXP from a previous version because he keeps changing the VST ID's. That same fussy DAW (like RENOISE) sometimes doesn't bring back the patch correctly with the song and therefore forcing a separate save to FXP from it into your project. Maybe better off with no routing, sometimes there is no difference because it includes distortion. One more thing: *love* that "Reese" patch this comes with!
(2 / 5)
Terrible, if you want better bass get minimogue Lux!
(5 / 5)
You can usually tell the good ones from the "friends only" ones by the number of votes. This is a good one! I compared it to the Sylenth1 demo (Soft Bass) and actually preferred this (Plucked 2). Just goes to show that with a bit of digging and innovation, you can get really good sounds out of freeware.
Good analog basses, pretty interface.
(4 / 5)
Sub Bass is Amazing
(5 / 5)
Один из лучших бесплатных синтезаторов, которыми я пользовался. Очень простой и гибкий.
Good at start but after a while, puts everything up to a higher pitch when you export :(
(5 / 5)
I really like this synth. I like the sound, the ease of programming, the way the gui works, it even has a manual!!!